The Best Way to Fix Peeling Car Paint

Peeling paint on your car is not just an eyesore. It’s also a sign of damage that needs to be taken care of before it gets worse. If you wait too long, the problem will only get more difficult and expensive to fix, so here are some tips for how to repair peeling paint on your car service!

Step One: Prep Your Car for Paint

If you’re planning on doing the work yourself, make sure to prep your car properly before you get started. That means cleaning it thoroughly and then covering any areas that aren’t getting painted (such as moving parts like tires). You should also add masking tape over the trim and any other areas that you don’t want to get paint on.

Step Two: Sand the Paint

You can use a power sander for this, but it is very important that you don’t start sanding until the entire old coat of paint has been removed. Start by using a coarse grit of 220 and work your way up.

Step Three: Clean the paint

Sand the Paint

After you have sanded your car, wash it down to remove any dust or other particles that could still be on the surface. You can also use wax and grease remover if you need something stronger. Anything left behind will make it harder for your new coat of paint to stick.

Step Four: Apply primer

Use a few layers of primer that will match your paint. This is important because it will ensure that the new coat covers the old, and also unifies the colors. Allow each layer to dry completely before adding another one. It’s worth noting that you should switch to an airbrush for this step if you have one.

Step Five: Apply Base Coat

Your choice of base coat will depend on the type of paint that was originally used on your car. If you are not sure, it’s best to play it safe by using the same kind as before or choosing an exact match. Like primer, use a few layers of color and allow each layer to dry before adding another.

Step Six: Apply Paint Protection Coat

Your new top coat should also be the exact same color as your car, or chosen to match it exactly. Just like with previous steps, apply several layers and allow each one to dry completely before moving on. If you want a glossy finish, this is where you can add a bit of wax to make it shiny.

Step Seven: Protect your paint

You should apply a protective coat over the entire surface of your car after you have finished painting. You can protect against things like dirt and water damage with this, but also the wear and tear that comes from driving around every day. This will be an important step in making sure your repairs last as long as possible.

Step Eight: Wash the car

If you followed all of these steps, your paint should be looking like new again! The only way to keep it looking that way is by washing and waxing it regularly. You can also use a vinyl protectant spray to help keep the trim in good condition.

Conclusion

Now that you know how to repair peeling paint on your car, you should be able to take care of the problem quickly and easily!